Technologies

Start Your Project Off Right With the Best 3D Printing Filament in 2022

There are a lot of different 3D-printing materials out there. Here’s how to pick the right one for your project.

You’ve got the best 3D printer you can buy, but without materials, you can’t get printing. If you chose a fused deposition modeling, or FDM, printer — the most common type of 3D printer for hobbyists — you’ll need a few rolls of special plastic. The material we use for FDM 3D printing is called filament and it’s an easy material to pick up. There are, however, different types of filament, each good for certain projects and terrible for others. You’ll want to make sure you’re using the best filament for the job at hand, or it may fail.

I’ve put together this primer of the different types of filament as well as choices of the best filaments from my favorite brands. This will be updated regularly and contains some great choices for you to start.

A collection of awesome 3D printing models! — James Bricknell/CNET

It’s important to choose both the right type of material and the right brand of that type, be it PLA, ABS or something more exotic. Here are the best of each of the five main filament types.

Read more: Best 3D Printers

Those categories are:

PLA

ABS

PETG

TPU

Exotics

PLA is the easiest material to use to make awesome things.

James Bricknell/CNET

Polylactic acid

Polylactic acid, or PLA, is the most common 3D printing filament and the easiest to use. Unlike most plastics, it’s made from corn starches so it is non-toxic and, in theory, compostable, though it takes an industrial composter to do it. PLA uses a fairly low heat — between 190 and 215 degrees Celsius (or between 374 and 419 degrees Fahrenheit) — to melt the plastic for extrusion so it is the safest of the filaments. Almost every FDM 3D printer in the world can print PLA.

PLA pros

Nontoxic
No awful smell
Easy to use for a beginner
Almost universally usable on any FDM printer
Very cheap

PLA cons

Can require a lot of sanding
Can easily warp in the sun or high-temp environments
Can be brittle

MatterHackers

MatterHackers Build PLA

Best overall

Build PLA from MatterHackers is great for projects that require finishing (sanding, painting and so on). I have about 12 rolls of it in my workshop, and use it for large projects, including my Mandalorian armor or cosplay swords. The dimensional accuracy — how consistent the diameter is along the length of the roll — is good, though nothing mind-blowing. It’s well within the sweet zone.

Post-processing is where Build Series PLA shines. It is simple to sand and holds paint well, as long as you use a good primer and filler first. Like all PLA, it holds together well using superglue and even takes putty and Bondo without complaint.

$21 at MatterHackers

Flashforge

Flashforge Burnt Titanium PLA

The best metallic look ever

The color of this PLA is hard to describe, but it is beautiful. It has a purple-blue-green hue to it and looks like metal that’s been heated up a lot. Right now it’s probably my favorite-looking filament on my shelf.

It’s also easy to print with, and because of the shifting colors it hides layer lines well. If you’re looking for a dark filament that you aren’t painting over, I’d pick up a few rolls of this today.

$26 at Amazon

Get Price Alerts

You’re receiving price alerts for Flashforge 3D Printer Filament Mulitcolor PLA 1.75mm, 3D Printing Filament 1kg Spool-Dimensional Accuracy +/- 0.02mm, Environmental Friendliness, no Smoke and no Odor (Burnt Titanium, PLA)

MatterHackers

MatterHackers Quantum PLA

Something new and exciting

For something completely different in the PLA world, check out Quantum by MatterHackers. Transitional filament, mixing multiple colors, has been around for a while, but it normally changes color across the length of the material. This causes it to change color as it goes further up the model.

Quantum is actually two colors fused across the entire width, so you get an amazing transition from left to right. It’s absolutely mesmerizing, and I love using it for all sorts of different projects. From vases to giant articulated octopuses, it makes any model look breathtaking.

$30 at MatterHackers

Cookiecad

CookieCad Mint chip

It’s ice cream that won’t melt!

I have been meaning to buy some of this beautiful filament for some time now, and I’m really happy I did. The color is almost exactly the same as Mint choc chip ice cream and the tiny flecks of marble color enhance the look even more. It prints great, with a nice glossy finish, and I found printing it at a higher temperature brings out that gloss really well.

More importantly than the print quality though, I love it for the way it makes me feel. The color just makes me happy and reminds me of days at the beach with my kids. It’s gorgeous.

$35 at Amazon

Get Price Alerts

You’re receiving price alerts for CookieCad Mint chip

Sunlu

Sunlu PLA

Best on a budget

Sunlu is one of those filaments that is really easy to get hold of and prints well every time you use it. It says its dimensional accuracy is +/- 0.02mm, but I’ve been lucky to never have the variance above 0.01mm in hands-on use.

Sunlu also comes in some beautiful matte colors, which is a welcome break from more common shiny filaments. Sanding and printing with it is easy. If you’re new to 3D printing and need to increase your collection of PLA, this is a cheap way to do it.

$19 at Amazon

Get Price Alerts

You’re receiving price alerts for Sunlu PLA

James Bricknell/CNET

Creality short transition rainbow PLA

So many colors!

Rainbow filament tends to transition between colors very slowly. This means you often get only one or two colors per model. Creality’s latest rainbow filament has a much shorter transition, so you get a much nicer rainbow effect across your models. It looks great on this amazing dragon from Fotis Mint.

$24 at Amazon

Polymaker

Polymaker PolyTerra

Environmental thinking

For projects you can show off without having to paint them first, PolyTerra might be for you. The colors are vivid, and because they are matte, you don’t lose details in the reflections like with shiny filament.

PolyTerra also comes in recycled cardboard reels, and the creator, Polymaker, will plant a tree in the area where the roll was bought to help offset the cardboard used. This filament is still plastic of course, but it helps my conscience to use it.

$20 at Amazon

Get Price Alerts

You’re receiving price alerts for Polymaker PolyTerra

Ataraxia Art

Bouncy bouncy

In this article about this flexible PLA I explained how, although this isn’t technically PLA, it does print much easier than TPU, a more common flexible filament. I used it to print an amazing Mandalorian Blacksmith helmet for my 4-year-old. She can’t break it because it’s so bouncy.

This isn’t for newbies, though. It took a lot of trial and error to get the setting for my 3D printer right, and because it is so soft the accuracy can be pretty wonky. But for something that’s different from normal PLA, it is worth checking out.

$35 at Amazon

Get Price Alerts

You’re receiving price alerts for ATARAXIA ART Flexible PLA filament 1.75mm, 3D Printer Filament, PLA filament,1kg, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, With Filament storage Bag, PLA VIOLET

Acrylonitrile butadiene styrene

ABS was one of the more 3D printing filaments a few years back, and it still has some excellent uses. The biggest downside is the toxicity. You don’t want to breathe in ABS as it melts, so you’ll need a well-ventilated area. That aside, it’s sturdier and more heat-resistant than PLA. Most printers can print ABS, but you’ll need a heated bed that can reach 100 degrees Celsius for best results and protecting your printing job in an enclosed printer is a good idea.

ABS pros

Can withstand a lot of heat
Easy to sand
Can be smoothed with acetone for a perfect shine

ABS cons

Its fumes are toxic so it requires ventilation
It needs far more heat to print than PLA
You will need an enclosure to get good results

Inland

Inland 1.75mm Black ABS

Cheap and cheerful

Inland makes good filament across the board and its ABS is no different. I’ve never had issues with the dimensions, and the final product has consistent layer lines. Sanding Inland ABS is a joy as the material can be wet-sanded to a smooth finish.

$21 at Amazon

Get Price Alerts

You’re receiving price alerts for Inland 1.75mm Black ABS

MatterHackers

Fillamentum ExtraFill ABS

Bright and beautiful

Fillamentum is one of my favorite ABS makers. The colors are always so vibrant, and while it costs a little more than the competition, it keeps that vibrancy even after the model is finished printing. If you’re looking for ABS that you don’t need to paint, Fillamentum is a great place to start.

$45 at Matterhackers

Polyethylene terephthalate glycol

PETG is chemically similar to the plastic that water and soft drink bottles are made of, and is a great alternative to ABS. It has the heat-resistant properties of ABS without the toxic fumes and can be sanded much like PLA. Most FDM printers that can print PLA can print PETG, though it takes a little more effort to get right.

PETG pros

Easier to print than ABS
Holds a finish well
Easier to store than other filaments

PETG cons

Requires high temps, which can damage printer parts over time.

Protomaker

Protomaker Translucent PETG

Almost like glass

This USA-made PETG has an excellent glassy look that is hard to achieve in melted plastic. The aqua color is subtle and gives the appearance of a stained glass window when printed at the high end of its temperature scale.

Printing with it was easy, though the roll is a little big for printers like the Bambu Lab X1, that has enclosed filament system.

$33 at Protomaker 3D

Matterhackers

MatterHackers Pro series PETG

Glorious colors

The Pro series filament from MatterHackers is a much nicer product than a lot of standard PETG. Yes, it costs a little more, but it’s designed to help reduce some of the issues that filament suffers from. It reduces shrinkage, so the part you make is as close to the part you designed as possible. This is a great material for those who make 3D printed models for a living, rather than a hobby.

$57 at MatterHackers

Overture

Overture PETG Filament 2-pack

Stock up on your PETG

Overture PETG is a favorite because it comes in an economical two-pack, making it ideal for multiple or larger jobs. I’ve used a lot of Overture products, including PETG and PLA, and they always print well. I once printed an 11-foot-long Masamune sword using Overture and it came out looking awesome.

$39 at Amazon

Get Price Alerts

You’re receiving price alerts for Overture PETG Filament 2-pack

Thermoplastic polyurethane

TPU is a flexible material that can make cool rubbery models. Most people use it to 3D print phone cases, but more serious modelers often use it to create connectors or flexible hinges to other materials. It can be a difficult material to work with and is best used on a direct-drive 3D printer such as the Prusa Mk3s, rather than a Bowden printer like the Anycubic Vyper. A direct drive printer places the gears to move the filament directly on the print head, while a Bowden setup has them on the frame of the printer.

TPU pros

Flexible
Won’t warp in the heat
Available in fun colors

TPU cons

Terrible for making solid prints
Hard to work with on budget printers

MatterHackers

MatterHackers Build Series TPU

For everyday use

MatterHackers Build Series Materials sit in the perfect balance between usability and cost. Yes, I’ve had failures with the Build Series, but once you get it dialed into your printer, you can make dozens of fun, springy models.

I like to use it to make fun toys for my kid’s preschool as they can be thrown around with no fear of breaking into small, sharp pieces.

$29 at MatterHackers

Exotic filaments

Exotic filaments are ones that are outside the normal five choices, or interesting variations on those choices. They’re often PLA mixed with carbon fiber or glow-in-the-dark chemicals and something that prints outside the normal parameters of a 3D printer. You’ll often need to upgrade your printer nozzle to use these. It’s advanced stuff, but I wanted to show you my favorite glow-in-the-dark filament, which is fun to print with.

Amolen PLA

Amolen PLA Filament Glow in The Dark Multicolor PLA

Get a good glow on!

Glow-in-the-dark filament normally comes in a standard «radioactive» green, but this beautiful roll transitions through multiple colors. It’s simply gorgeous.

It’s also worthwhile to buy some replacement brass nozzles for your printer as glow-in-the-dark filament can chew them up pretty quickly because the glowing material is more abrasive than standard colors.

$37 at Amazon

Get Price Alerts

You’re receiving price alerts for Amolen PLA Filament Glow in The Dark Multicolor PLA

Filament FAQ

What filament should I start with?

If you’re buying a printer for the first time, the best choice of filament is PLA. It is the easiest to print with, the safest in terms of fumes and the most readily available. Think about laying in a store of PLA when you first start. A 1-kilogram roll feels like a lot, but once you get the itch, materials get eaten up quickly.

Are there different sizes of filament?

Yes. There are two main thicknesses of filament and if you get them mixed up, your machine won’t print.

1.75mm filament is the most common. It’s been adopted by most of the 3D manufacturers in the world and if you have an entry-level printer, it’s likely to run on 1.75mm filament.

Some 3D printers still use the thicker 3mm style, though, so make sure you know which one yours uses before you spend a lot of money on the wrong material.

Are all filaments toxic?

When 3D printing with any filament, it is important to remember that you are essentially burning plastic. Inhaling that kind of thing is never going to be good, but not all filaments are equally bad.

Of the four main filament types, ABS is easily the most toxic. You shouldn’t think about printing it unless you have a well-ventilated space away from your day-to-day living spaces. I have a workshop with a full ventilation system and the fumes can still be pretty bad.

Both PLA and PETG are considered nontoxic, though you still want to keep your area ventilated as you use them. Both filaments are safe to print inside your home and while the fumes can smell pretty bad, they’re not classed as carcinogenic. While other forms of TPU can be toxic, the filament you use for 3D printing is considered nontoxic and nonreactive so you should be fine printing that as well.

Does the filament keep the same color after printing?

Normally yes. If your printer isn’t calibrated well, it could burn the filament, which would discolor it. But normally the color accuracy is pretty close.

A special note on clear plastics: You will not be able to get a completely translucent print with filament. The nature of the printing process makes any clear plastic misty and infill makes it blurry as well. If you are looking to print glass-like models, you will need a resin printer.

Having the right diameter makes for a better print.

Dan Ackerman/CNET

How we test filament

The testing of filament is mainly focused on a few details: Dimensional accuracy, winding precision, and printing quality. Winding precision is a visual test where I check to make sure the filament works well on the spool, without any crossovers that can cause snags while printing.

Print quality is done using a CNET calibration test that I use to test all of the 3D printers I review. When checking for filament quality, I’m looking for noticeable roughness and missing filament where moisture or other contaminants have interrupted the process of melting and cooling.

Dimensional accuracy is perhaps the most important test as it measures the consistency of filament. As you move along, the filament changes in diameter will cause the 3D printer to over- or under-extrude filament. This creates noticeable scarring in your model, or worse, complete failure. You want the material to have the same diameter the whole way through.

To measure the accuracy, I take a 5-meter piece of filament from the beginning, middle and end of the roll and measure the diameter at four equally spaced points. I then add all of those measurements up and divide the total by 12 — the total number of measurements taken — to give me an average across the roll. Most modern printers use 1.75mm filament so you want the filament to be as close to that as possible.

Great filament has a variance of +/- 0.02mm, good filament is +/- 0.03mm and rough filament is anything +/- 0.05mm. All of the filaments we have recommended here are at least 0.03mm on average.

iOS 17 Cheat Sheet: Your Questions on the iPhone Update Answered

Here’s what you need to know about new features and upcoming updates for your iPhone.

Apple’s iOS 17 was released in September, shortly after the company held its Wonderlust event, where the tech giant announced the new iPhone 15 lineup, the Apple Watch Series 9 and the Apple Watch Ultra 2. We put together this cheat sheet to help you learn about and use the new features in iOS 17. It’ll also help you keep track of the subsequent iOS 17 updates.

iOS 17 updates

Using iOS 17

Getting started with iOS 17

Make sure to check back periodically for more iOS 17 tips and how to use new features as Apple releases more updates.

17 Hidden iOS 17 Features You Should Definitely Know About

+15 More

See all photos

Technologies

Get Ready for a Striking Aurora That Could Also Disrupt Radio Communications

Don’t expect the storm to cause a lingering problem, though.

A geomagnetic storm is threatening radio communications Monday night, but that doesn’t mean you should be concerned. In fact, it may be an opportunity to see a colorful aurora in the night sky.

The National Oceanic and Atmospheric Administration has issued a geomagnetic storm watch after witnessing a coronal mass ejection from the sun on Saturday. The watch, which was issued over the weekend and will expire after Monday, said the onset of the storm passing over Earth on Sunday night represented a «moderate» threat to communications. As the storm continues to pass through, it could deliver a «strong» threat on Monday night that could cause radio communications to be temporarily disrupted during the worst of it.

Even so, NOAA said, «the general public should not be concerned.»

A coronal mass ejection occurs when magnetic field and plasma mass are violently expelled from the sun’s corona, or the outermost portion of the sun’s atmosphere. In the vast majority of cases, the ejection occurs with no real threat to Earth. However, in the event the ejection happens in the planet’s direction, a geomagnetic storm occurs, and the Earth’s magnetic field is temporarily affected.

In most cases, geomagnetic storms cause little to no disruption on Earth, with radio communications and satellites affected most often. In extreme cases, a geomagnetic storm can cause significant and potentially life-threatening power outages — a prospect that, luckily, the planet hasn’t faced.

Switching poles

Every 11 years, the sun’s magnetic poles switch, with the north pole and south pole swapping positions. During those cycles, the sun’s activity ramps up as it gets closer to pole-switching time. The height of its activity is called solar maximum, and scientists believe we either may be entering the solar maximum or may be already in it.

During periods of heightened solar activity, sunspots increase on the sun and there’s an increase in coronal mass ejections, among other phenomena. According to NOAA, solar maximum could extend into October of this year before the sun’s activity calms and it works towards its less-active phase, solar minimum.

Even when geomagnetic storms hit Earth and disrupt communications, the effects are usually short-lived. Those most affected, including power grid operators and pilots and air traffic controllers communicating over long distances, have fail-safe technologies and backup communications to ensure operational continuity.

But geomagnetic storms aren’t only about radios. In most cases, they also present unique opportunities to see auroras in the night sky. When the storms hit, the plasma they carry creates a jaw-dropping aurora, illuminating the night sky with brilliant colors. Those auroras can be especially pronounced during the most intense phases of the storm, making for nice stargazing.

If you’re interested in seeing the aurora, you’ll need to be ready. The NOAA said the «brunt of the storm has passed» and even if it lingers into Tuesday, there won’t be much to see after Monday night.

Technologies

Last Total Solar Eclipse for 20 Years Is Coming: How to See and Photograph It

It’s your last chance until 2044.

Get your eclipse glasses ready, Skygazers: the Great American Eclipse is on its way. On April 8, there’ll be a total eclipse over North America, the last one until 2044.

A total solar eclipse happens when the moon passes between the Earth and the sun, blocking the sun and turning an otherwise sunny day to darkness for a short period of time. Depending on the angle at which you’re viewing the eclipse, you may see the sun completely shrouded by the moon (called totality) or some variation of it. The more off-angle you are and the further you are from the path of the eclipse, the less likely you’ll be to see the totality.

The 2024 total solar eclipse will happen on Monday, April 8. The Great American Eclipse will reach the Mexican Pacific coast at 11:07 a.m. PT (2:07 p.m. ET), and then traverse the US in a northeasterly direction from Texas to Maine, and on into easternmost Canada. If you want a good look at it, but don’t live in the path of totality, you shouldn’t wait much longer to book accommodation and travel to a spot on the path.

Or how about booking a seat in the sky? Delta Airlines made headlines for offering a flight that allows you to see the entire path of totality. Its first eclipse flight, from Austin, Texas, to Detroit sold out quickly. But as of Monday, Delta has added a second flight from Dallas to Detroit, which also covers the path of totality. The airline also has five flights that will offer prime eclipse viewing.

Not everyone can get on one of those elusive eclipse-viewing flights. Here’s a look at other options to nab a chance to see this rare sight and what to know about it.

Total solar eclipse path

The eclipse will cross over the Pacific coast of Mexico and head northeast over mainland Mexico. The eclipse will then make its way over San Antonio at approximately 2:30 p.m. ET on April 8 and move through Texas, over the southeastern part of Oklahoma and northern Arkansas by 2:50 p.m. ET.

By 3 p.m. ET, the eclipse will be over southern Illinois, and just 5 minutes later, will be traveling over Indianapolis. Folks in northwestern Ohio will be treated to the eclipse by 3:15 p.m. ET, and it will then travel over Lake Erie and Buffalo, New York, by 3:20 p.m. ET. Over the next 10 minutes, the eclipse will be seen over northern New York state, then over Vermont. By 3:35 p.m. ET, the eclipse will work its way into Canada and off the Eastern coast of North America.

Best places to watch the Great American Eclipse

When evaluating the best places to watch this year’s total eclipse, you’ll first want to determine where you’ll have the best angle to see the totality. The farther off-angle you are — in other words, the farther north or south of the eclipse’s path — the less of an impact you can expect.

Therefore, if you want to have the best chance of experiencing the eclipse, you’ll want to be in its path. As of this writing, most of the cities in the eclipse’s path have some hotel availability, but recent reports have suggested that rooms are booking up. And as more rooms are booked, prices are going up.

So if you want to be in the eclipse’s path, and need a hotel to do it, move fast. And Delta’s eclipse-viewing flight from Dallas to Detroit has just four seats left at the time of publication.

Eclipse eye safety and photography

As with any solar eclipse, it’s critical you keep eye safety in mind.

During the eclipse, and especially during the periods before and after totality, don’t look directly at the sun without special eye protection. Also, be sure not to look at the sun through a camera (including the camera on your phone), binoculars, a telescope or any other viewing device. This could cause serious eye injury. Sunglasses aren’t enough to protect your eyes from damage.

If you want to view the eclipse, you’ll instead need solar viewing glasses that comply with the ISO 12312-2 safety standard. Anything that doesn’t meet that standard or greater won’t be dark enough to protect your eyes. Want to get them for free? If you’ve got a Warby Parker eyeglasses store nearby, the company is giving away free, ISO-certified solar eclipse glasses at all of its stores from April 1 until the eclipse, while supplies last.

If you don’t have eclipse viewing glasses handy, you can instead use indirect methods for viewing the eclipse, like a pinhole projector.

Read more: A Photographer’s Adventure With the Eclipse

In the event you want to take pictures of the eclipse, attach a certified solar filter to your camera. Doing so will protect your eyes and allow you to take photos while you view the eclipse through your lens.

There’s also a new app to help you both protect your eyes and take better photos of the eclipse on your phone. Solar Snap, designed by a former Hubble Space Telescope astronomer, comes with a Solar Snap camera filter that attaches to the back of an iPhone or Android phone, along with solar eclipse glasses for protecting your eyesight during the event. After you attach the filter to your phone, you can use the free Solar Snap Eclipse app to zoom in on the eclipse, adjust exposure and other camera settings, and ultimately take better shots of the eclipse.

2024 eclipse compared to 2017

The last total solar eclipse occurred in 2017, and many Americans had a great view. Although there are plenty of similarities between the 2017 total solar eclipse and the one coming April 8, there are a handful of differences. Mainly, the 2024 eclipse is going to cover more land and last longer.

The 2017 eclipse started over the northwest US and moved southeast. Additionally, that eclipse’s path was up to 71 miles wide, compared with a maximum width of 122 miles for this year’s eclipse. Perhaps most importantly, the moon completely covered the sun for just 2 minutes, 40 seconds in 2017. This year, maximum totality will last for nearly four-and-a-half minutes.