Technologies
Check Out These 10 Easy Hacks to Boost Your Phone’s Reception on iPhone or Android
Use these tips to keep your cellphone reception strong, even when you’re on the road.
The last thing you want while on a road trip is looking over to realize your cell signal has tanked, leaving you without GPS and with no way to reach out for help. While low signal strength is a serious problem that can cause a variety of issues, there are some easy fixes that might just help get you connected again.
Whether you’re doing some routine phone maintenance or you’re stuck in an emergency, there are multiple ways to improve your reception on an iPhone or Android phone, no matter what type of phone plan you’re on. It might even come down to something as simple as toggling Airplane mode.
To go from dropped calls to full bars, here’s what you need to know.
Note: Although software across different iPhone models is relatively the same, Samsung Galaxy, Google Pixel and other Android phones may have different software versions, so certain settings and where they are located might differ depending on device.
For more, check out how you can use Google Maps when you’re offline and how you can maybe fix your internet when it’s down.
To improve your cellphone service, try these steps first
The settings on your phone can help you get better cell service, but there are other tricks for improving your reception without even touching your phone’s software.
- Move yourself so that there are no obstructions between your phone and any cell towers outside. That might involve stepping away from metal objects or concrete walls, which both kill reception. Instead, get to a window or go outside if possible.
- Remove your phone case. It doesn’t hurt to remove whatever case you have on your phone, especially if it’s thick, so that the phone’s antenna isn’t blocked by anything and can get a better signal.
- Make sure your phone is charged. Searching for and connecting to a stronger signal drains power, so if your phone battery is already low on charge, you may have a difficult time getting good service.
Always start by turning Airplane mode on and off
Turning your phone’s connection off and then back on is the quickest and easiest way to try and fix your signal woes. If you’re moving around from one location to another, toggling Airplane mode restarts the Wi-Fi, Bluetooth and cellular network modems, which forces them to find the best signal in the area.
Android: Swipe down from the top of your screen — to access the Quick Settings panel — and then tap the Airplane mode icon. Wait for your phone to completely disconnect from its Wi-Fi and cellular connections. It doesn’t happen instantly, so give it a good 15 seconds before you tap on the Airplane mode icon again.
iPhone: On the iPhone, you can access Airplane mode from the Control Center, but that varies depending on which iPhone model you have. On the iPhone X and later, swipe down from the top-right corner to access the Control Center. On older iPhone models, swipe up from the bottom of the screen. Then tap the Airplane mode icon, which will turn orange when it’s enabled. Again, wait up to 15 seconds before turning it off.
If Airplane mode doesn’t work, restart your phone
Our phones are miniature computers, and just like computers, sometimes you can fix issues like network connection by simply restarting them.
Android: Hold down the power button, or the power button and the volume down key (depending on your Android phone), until the on-screen menu shows up, and then tap Restart. If your phone doesn’t offer a restart option, you can simply tap Power Off to shut down your device, and then boot it back up with the power button.
iPhone: On the iPhone X and older models, hold down the sleep/wake button and either one of the volume buttons and then swipe right on the power slider to turn off the device. Wait until it fully turns off, then press down on the sleep/wake button to turn it back on.
Alternatively, you can do a force reset on your iPhone: Press the volume up button, followed by the volume down button and then press and hold the side button. Keep holding it in, after your phone’s screen goes black and until you see the Apple logo appear again.
If your iPhone has a home button, hold down the sleep/wake button until the power slider is displayed and then drag the slider to the right. Once the device is turned off, press and hold the sleep/wake button until you see the Apple logo.
Older phone? Take your SIM card out
Another troubleshooting step that might help is to remove your SIM card, if your phone has one, and then place it back in with the phone turned on. If the SIM card is dirty, clean it. If it has any physical defects, you may need to replace it.
You’ll need a SIM card tool — usually included in your phone’s box — or an unfolded paper clip or sewing needle to get the SIM tray out of your phone.
All phones: Remove the SIM card, check to see if it’s damaged and positioned in the SIM tray correctly, then put it back in your phone.
eSIM: For phones with an eSIM — that is, an embedded electronic SIM in your phone — there’s nothing for you to remove. The best you can do is restart your phone.
Check your carrier settings (and update your software)
Mobile carriers frequently send out carrier settings updates to help improve connectivity for calls, data and messages on their network. Although this feature is available on all iPhone models, it’s not universal on Android, so you might not find carrier settings if you don’t have a supported phone.
iPhone: Carrier updates should just appear, and you can update from the pop-up message that appears. To force your iPhone to check for a carrier settings update, go to Settings > General > About on your phone. If an update is available, you’ll be prompted to install it.
Android: As mentioned before, not all Android phones have carrier settings, so you’ll have to open the Settings app and type in «carrier settings» to find any possible updates. On supported Pixels, go to Settings > Network & internet > Internet, tap the gear next to your carrier name and then tap Carrier settings versions.
Reset your phone’s network settings
Sometimes all you need is a clean slate to fix an annoying connectivity issue. Refreshing your phone’s network settings is one way to do that. But be forewarned, resetting your network settings will also reset any saved Wi-Fi passwords, VPN connections and custom APN settings for those on carriers that require additional setup.
Android: In the Settings app, search for «reset» or more specifically «reset network settings» and tap on the setting. On the Pixel, the setting is called Reset Wi-Fi, mobile & Bluetooth. After you reset your network settings, remember to reconnect your phone to your home and work Wi-Fi networks.
iPhone: Go to Settings > Transfer or Reset iPhone > Reset > Reset Network settings. The next page will warn you that resetting your network settings will reset your settings for Wi-Fi, mobile data and Bluetooth. Tap Reset Network Settings and your phone will restart.
Contact your phone carrier
Sometimes unexpected signal issues can be traced back to problems with your wireless carrier. A cell tower could be down, or the tower’s fiber optic cable could have been cut, causing an outage.
For consistent problems connecting to or staying connected to a cellular or data network, it’s possible your carrier’s coverage doesn’t extend well into your neighborhood.
Other times, a newfound signal issue can be due to a defect with your phone or a SIM card that’s gone bad. Contacting your carrier to begin troubleshooting after you’ve tried these fixes is the next best step to resolving your spotty signal.
If all else fails, try a signal booster to improve cell reception
If after going through all of our troubleshooting steps, including talking to your carrier to go over your options, you’re still struggling to keep a good signal — try a booster. A signal booster receives the same cellular signal your carrier uses, then amplifies it just enough to provide coverage in a room or your entire house.
The big downside here is the cost. Wilson has three different boosters designed for home use, ranging in price from $349 for single room coverage to $999 to cover your entire home. To be clear, we haven’t specifically tested these models. Wilson offers a 30-day money-back guarantee and a two-year warranty should you have any trouble with its products.
Technologies
I Tried an Air Purifier Designed to Filter Out Weed and Cigarette Smoke
Just because you celebrate 420 doesn’t mean you want the smell of smoke. A new specialty filter from GermGuardian helps keep things fresh.
In the US and globally, April 20 has become an unofficial holiday for weed smokers. While vaping, gummies and edibles are increasingly popular, a fair number of people still light up for a smoke, and that can result in a lingering odor many find unpleasant.
I’m one of those people, and GermGuardian’s new FLT420B air purifier filter is designed to remove cannabis smoke more effectively than standard air purifier filters.
«As cannabis use becomes more widely accepted, we recognized a real gap in the market for a filter purpose-built to tackle cannabis smoke odors, not just mask them,» said Rukky Ojakovo, senior director of heaters and air quality at Guardian Technologies. «In our two-week in-home test, over 90% of users rated it very effective at reducing cannabis odor.»
I’ve been using the FLT420B filter in my home with a GermGuardian AC4880B air purifier for several weeks now, and I’ve been impressed with just how effectively it tackles smoke odors. In my case, the odor is more from cigarette smoke than marijuana (I had the misfortune of indoor smokers moving into the unit below me). The FLT420B filter has been effective at tackling the smell.
«While the FLT420B was engineered specifically for cannabis smoke, its advanced odor-control media targets VOCs [volatile organic compounds] broadly, making it effective against other herbal smoke as well,» Ojakovo told me over email.
According to GermGuardian, the filter is 300 times more effective than standard HEPA smoke filters and targets odor-causing VOCs at the «molecular» level. The company says it can remove cannabis odor within 90 minutes. Though I’m not a marijuana smoker myself — I’m very sensitive to bad odors, and I have two asthmatic cats — I’m planning on testing this soon by using cannabis-scented incense sticks.
In the meantime, to test this, I placed the entire AC4880B air purifier unit, with the smoke filter installed, in a closet in my wife’s office and shut the door. Using the UV-C sanitizing light, which can generate a small amount of safe ozone, the entire closet was effectively deodorized in about 24 hours.
I asked Ojakovo what played the largest role in clearing the odor from the closet. The filter was the primary driver.
«The FLT420B’s advanced odor-control media is specifically designed to capture VOCs and lingering odors like cigarette smoke,» Ojakovo said. «The UV-C light is great for reducing airborne bacteria, germs, and mold spores, but is less targeted toward chemical-based smoke odors specifically.»
Interestingly, even after I pulled it out of the closet, the air inside has stayed deodorized, though sealing gaps and cracks likely helped.
To further test how well the filter cleared smells, I moved the GermGuardian unit to my galley kitchen and placed it by my trash cans. There’s not much ventilation in there, and I have a gas range, so there are plenty of VOCs. I’ve left it there for over a week now, and since then, I’ve noticed a distinct reduction in stale cooking smells and a general improvement in air quality, verified by an air quality monitor.
«Since the FLT420B is designed to tackle VOCs, it can certainly help with cooking-related odors and gases,» said Ojakovo, while also pointing out that the company sells filters designed for kitchen use specifically. «For heavier kitchen use near a gas range, we’d recommend exploring our broader lineup of filters, designed for specific use cases.»
Now, if you suffer from allergies, you may want to consider a different air purifier model, but for VOCs, it’s been one of the more effective ones I’ve used.
Price and availability
The FLT420B will work with GermGuardian’s most widely used air purifiers, including the AC4880, AC4825E, AC4300, AC4825, AC4870, AC4820, AC4900, AC4850PT, CDAP4500 and AP2200CA. If you own one of those models, it’s simply a matter of purchasing the FLT420B filter from Amazon (currently out of stock) or directly from Guardian Technologies for $40.
If you’re a new customer, you can buy the model with the features you prefer and pair it with a filter that suits your use case.
Editor’s note: While cannabis has been legalized for medical and even recreational use in some states, marijuana and products containing THC are still a Schedule I drug under US federal law. Always exercise caution and judgment when consuming cannabis or any other controlled substance.
Technologies
‘Han Solo Wants to Be Me’: Artemis II’s Victor Glover on Flying the Orion
CNET spoke with the Artemis II astronaut and pilot about seeing parts of the moon that no other human has seen before and getting to manually fly a spacecraft.
Even if you’re 250,000 miles from Earth, sleep is important. However, for all the life-sustaining accoutrements aboard the Orion spacecraft, the capsule lacked bedrooms, leaving the four-person Artemis II crew with a truly bizarre sleeping arrangement.
«I slept really close to an air conditioning vent. And so I’d wake up and I just see this big hunk of metal,» Glover told CNET during a video call. «And it was like, ‘Oh, I’m in space. I am weightless.'»
Sleep wasn’t just a means for the astronauts to recharge; it also grounded them during their historic journey. Glover explained, «What really resonated with me is we’re also humans. It’s like camping, and this is a very important part of this journey.»
Artemis II was the first crewed mission to the moon in over 50 years. It followed Artemis I, a 2022 uncrewed mission that was the first for NASA’s new Space Launch System rocket and Orion spacecraft. The goal for Artemis II was to have a crew test the spacecraft, life support systems, the SLS rocket and the procedures needed for future lunar missions that will involve landing on the moon and eventually building a base there.
Glover, the Orion’s pilot, along with commander Reid Wiseman and mission specialists Christina Koch and Jeremy Hansen, made up the Artemis II crew. The mission made a lot of history. It’s the first time a woman, a Black man or a Canadian has journeyed to the moon. The four Artemis II astronauts traveled 252,756 miles from Earth, farther than any other human being, surpassing the record set by the 1970 Apollo 13 mission.
This wasn’t Glover’s first time in space. In 2020, with a Falcon 9 rocket for liftoff, he piloted the Crew Dragon capsule to and from the International Space Station for NASA’s SpaceX Crew-1 mission, spending over 167 days in space. But Artemis II gave Glover the opportunity to be the first to fly the Orion, a new vehicle designed for Artemis missions. For the majority of the nearly 10-day journey, Orion was on autopilot. But Glover had several opportunities to take manual control of the spacecraft to test its handling.
«It was such a treat and a joy,» Glover said about flying the Orion. «It was a test pilot’s dream to fly a new spaceship for the first time by hand.»
Even after spending time training to fly in a simulator back on Earth, he was surprised by how responsive the Orion’s hand controller was and by the clarity of the cameras, used to maneuver the craft around the Interim Cryogenic Propulsion Stage that holds the fuel for the upper stage of liftoff. He said the view from the cameras and monitors was like «looking out a window.»
When I asked Glover if he felt like Han Solo when piloting the Orion, he retorted, «Han Solo wants to be me when he grows up!» Throughout my interview, Glover was gracious, passionate and funny.
«I get to do stuff that’s cooler than Han Solo. I mean, just the fact that it’s real, it’s better.»
While landing on the moon wasn’t in the cards for this trip, the Orion crew traveled about 4,000 miles beyond the moon, allowing them to see parts of the moon that had never been seen before. For comparison, Apollo missions flew about 70 miles above the moon to make landings, limiting how much of it they could actually see.
The images that Glover and the crew took of the moon were stunning. Shots like the Earthset were a reminder of how beautiful our planet is and our place within the solar system. The astronauts even witnessed a total solar eclipse as they rounded the far side of the moon. But none of the photos they took compares to what they saw, according to Glover.
«I could see the curvature of the moon. Depth is just one aspect that you cannot see in the pictures. But here’s the other thing, the pictures lack scale.»
For the lunar flyby, the Orion was moving fast: 60,863 mph relative to Earth, but only 3,139 mph relative to the moon, according to NASA. The speed meant the shadows across the surface were constantly morphing into different shapes. Glover was particularly enamored with the moon’s terminator, where the light and dark sides of the moon meet. The terminator isn’t fixed and depends on the moon’s position relative to the sun. As Orion moved, it transformed into various shapes that looked like letters of the alphabet.
«People know, I fell in love with the terminator when I got to see the real one up close. I watched the terminator go from a letter C to a letter D, which means there was a point when the moon was half light, half dark. It was pointing right at me.»
Artemis II’s lunar flyby was a highlight of the journey for many of us on Earth, in part because we could watch it in real time on streaming services like Netflix. Nearly the entire mission was streamed live on NASA’s website and YouTube channel, making it feel like a reality show. One minute you’re watching the crew eat, work out, take photos of the moon; the next, there’s a random jar of Nutella floating by one of the cameras. I asked Glover whether it felt like he was on a TV show while on the Orion.
«It did not feel like a reality show on my end,» said Glover. «For you to see the science and hear us describing the moon, and to see us flying the spaceship by hand, and to see bedtime and bath time and teeth brush time, that’s what it’s like. The mission was all of those things.»
Glover was ecstatic to hear how I and others felt so connected to the crew during their mission. He said it was important to NASA to let the world in on everything it took to send four people a quarter of a million miles away.
«I think that maybe one of the really, most special things about this mission is how much you were able to see,» Glover said with a smile. «It makes me feel good that you felt like you were there.»
Technologies
Artemis II’s Victor Glover Chats With CNET
-
Technologies3 года agoTech Companies Need to Be Held Accountable for Security, Experts Say
-
Technologies3 года agoBest Handheld Game Console in 2023
-
Technologies3 года agoTighten Up Your VR Game With the Best Head Straps for Quest 2
-
Technologies4 года agoBlack Friday 2021: The best deals on TVs, headphones, kitchenware, and more
-
Technologies5 лет agoGoogle to require vaccinations as Silicon Valley rethinks return-to-office policies
-
Technologies5 лет agoVerum, Wickr and Threema: next generation secured messengers
-
Technologies4 года agoOlivia Harlan Dekker for Verum Messenger
-
Technologies4 года agoThe number of Сrypto Bank customers increased by 10% in five days
