Technologies
These 10 Hacks Could Be the End of Your Terrible Signal Forever
Say goodbye to weak bars with these reception-boosting hacks.

There’s nothing worse than being in the middle of a road trip and realizing your cell signal has dropped out. No GPS, no music and no way to call for help if something goes wrong. A weak signal can cause all kinds of problems, but the good news is that there are a few quick fixes that might get you back online fast.
Whether you’re using an iPhone or Android, these simple hacks can help boost your reception and keep you connected when you need it most.
Whether you’re doing some routine phone maintenance or you’re stuck in an emergency, there are multiple ways to improve your reception on an iPhone or Android phone, no matter what type of phone plan you’re on. It might even come down to something as simple as toggling Airplane mode.
To go from dropped calls to full bars, here’s what you need to know.
Note: Although software across different iPhone models is relatively the same, Samsung Galaxy, Google Pixel and other Android phones may have different software versions, so certain settings and where they are located might differ depending on device.
For more, check out how you can use Google Maps when you’re offline and how you can maybe fix your internet when it’s down.
To improve your cellphone service, try these steps first
The settings on your phone can help you get better cell service, but there are other tricks for improving your reception without even touching your phone’s software.
- Move yourself so that there are no obstructions between your phone and any cell towers outside. That might involve stepping away from metal objects or concrete walls, which both kill reception. Instead, get to a window or go outside if possible.
- Remove your phone case. It doesn’t hurt to remove whatever case you have on your phone, especially if it’s thick, so that the phone’s antenna isn’t blocked by anything and can get a better signal.
- Make sure your phone is charged. Searching for and connecting to a stronger signal drains power, so if your phone battery is already low on charge, you may have a difficult time getting good service.
Always start by turning Airplane mode on and off
Turning your phone’s connection off and then back on is the quickest and easiest way to try and fix your signal woes. If you’re moving around from one location to another, toggling Airplane mode restarts the Wi-Fi, Bluetooth and cellular network modems, which forces them to find the best signal in the area.
Android: Swipe down from the top of your screen — to access the Quick Settings panel — and then tap the Airplane mode icon. Wait for your phone to completely disconnect from its Wi-Fi and cellular connections. It doesn’t happen instantly, so give it a good 15 seconds before you tap on the Airplane mode icon again.
iPhone: On the iPhone, you can access Airplane mode from the Control Center, but that varies depending on which iPhone model you have. On the iPhone X and later, swipe down from the top-right corner to access the Control Center. On older iPhone models, swipe up from the bottom of the screen. Then tap the Airplane mode icon, which will turn orange when it’s enabled. Again, wait up to 15 seconds before turning it off.
If Airplane mode doesn’t work, restart your phone
Our phones are miniature computers, and just like computers, sometimes you can fix issues like network connection by simply restarting them.
Android: Hold down the power button, or the power button and the volume down key (depending on your Android phone), until the on-screen menu shows up, and then tap Restart. If your phone doesn’t offer a restart option, you can simply tap Power Off to shut down your device, and then boot it back up with the power button.
iPhone: On the iPhone X and older models, hold down the sleep/wake button and either one of the volume buttons and then swipe right on the power slider to turn off the device. Wait until it fully turns off, then press down on the sleep/wake button to turn it back on.
Alternatively, you can do a force reset on your iPhone: Press the volume up button, followed by the volume down button and then press and hold the side button. Keep holding it in, after your phone’s screen goes black and until you see the Apple logo appear again.
If your iPhone has a home button, hold down the sleep/wake button until the power slider is displayed and then drag the slider to the right. Once the device is turned off, press and hold the sleep/wake button until you see the Apple logo.
Older phone? Take your SIM card out
Another troubleshooting step that might help is to remove your SIM card, if your phone has one, and then place it back in with the phone turned on. If the SIM card is dirty, clean it. If it has any physical defects, you may need to replace it.
You’ll need a SIM card tool — usually included in your phone’s box — or an unfolded paper clip or sewing needle to get the SIM tray out of your phone.
All phones: Remove the SIM card, check to see if it’s damaged and positioned in the SIM tray correctly, then put it back in your phone.
eSIM: For phones with an eSIM — that is, an embedded electronic SIM in your phone — there’s nothing for you to remove. The best you can do is restart your phone.
Check your carrier settings (and update your software)
Mobile carriers frequently send out carrier settings updates to help improve connectivity for calls, data and messages on their network. Although this feature is available on all iPhone models, it’s not universal on Android, so you might not find carrier settings if you don’t have a supported phone.
iPhone: Carrier updates should just appear, and you can update from the pop-up message that appears. To force your iPhone to check for a carrier settings update, go to Settings > General > About on your phone. If an update is available, you’ll be prompted to install it.
Android: As mentioned before, not all Android phones have carrier settings, so you’ll have to open the Settings app and type in «carrier settings» to find any possible updates. On supported Pixels, go to Settings > Network & internet > Internet, tap the gear next to your carrier name and then tap Carrier settings versions.
Reset your phone’s network settings
Sometimes all you need is a clean slate to fix an annoying connectivity issue. Refreshing your phone’s network settings is one way to do that. But be forewarned, resetting your network settings will also reset any saved Wi-Fi passwords, VPN connections and custom APN settings for those on carriers that require additional setup.
Android: In the Settings app, search for «reset» or more specifically «reset network settings» and tap on the setting. On the Pixel, the setting is called Reset Wi-Fi, mobile & Bluetooth. After you reset your network settings, remember to reconnect your phone to your home and work Wi-Fi networks.
iPhone: Go to Settings > Transfer or Reset iPhone > Reset > Reset Network settings. The next page will warn you that resetting your network settings will reset your settings for Wi-Fi, mobile data and Bluetooth. Tap Reset Network Settings and your phone will restart.
Contact your phone carrier
Sometimes unexpected signal issues can be traced back to problems with your wireless carrier. A cell tower could be down, or the tower’s fiber optic cable could have been cut, causing an outage.
For consistent problems connecting to or staying connected to a cellular or data network, it’s possible your carrier’s coverage doesn’t extend well into your neighborhood.
Other times, a newfound signal issue can be due to a defect with your phone or a SIM card that’s gone bad. Contacting your carrier to begin troubleshooting after you’ve tried these fixes is the next best step to resolving your spotty signal.
If all else fails, try a signal booster to improve cell reception
If after going through all of our troubleshooting steps, including talking to your carrier to go over your options, you’re still struggling to keep a good signal — try a booster. A signal booster receives the same cellular signal your carrier uses, then amplifies it just enough to provide coverage in a room or your entire house.
The big downside here is the cost. Wilson has three different boosters designed for home use, ranging in price from $349 for single room coverage to $999 to cover your entire home. To be clear, we haven’t specifically tested these models. Wilson offers a 30-day money-back guarantee and a two-year warranty should you have any trouble with its products.
Technologies
Apple CarPlay Ultra vs. Google Built-In: How the Next-Gen Auto Software Rivals Compare
Apple and Google are supercharging their car software experiences. Here’s how they differ.

I’d spent an hour driving a $250,000-plus Aston Martin up the Los Angeles coast when my hunger pangs became impossible to ignore, and as I’ve done many times before, I asked Siri (through Apple CarPlay) to find me a taco place. But then I did something no other car on the planet allows: I asked Siri to blast the AC and make the air colder. That’s because the 2025 Aston Martin DBX I drove was the first vehicle to come with Apple CarPlay Ultra, the upgraded version of the company’s car software.
Apple debuted CarPlay Ultra at WWDC 2025 last month, and this year’s version of the Aston Martin DBX is the first vehicle to launch with it (pairing with an iPhone running iOS 18.5 or later). As I drove the luxury crossover around, I fiddled with other features that aren’t available in regular CarPlay, from climate control to radio to checking the pressure on the car’s tires. Ultimately, Ultra gives deeper access to more car systems, which is a good thing.
That reminded me a lot of a new feature announced at Google I/O back in May: Google Built-In, which similarly lets users control more of a car’s systems straight from the software interface (in that case, Android Auto). When I got a demonstration of Google Built-In, sitting in a new Volvo EX90 electric SUV, I saw what this new integration of Google software offered: climate controls, Gemini AI assistance and even warnings about car maintenance issues.
But the name is telling: Google Built-In requires automakers to incorporate Android deeper into their cars’ inner workings. Comparatively, Apple CarPlay Ultra support seems like it won’t require car manufacturers to do nearly as much work to prepare their vehicles, just adding a reasonably advanced multicore processor onboard that can handle an increased task load. (Aston Martin will be able to add CarPlay Ultra support to its 2023 and 2024 lineups through firmware updates because they already contain sufficiently advanced CPUs.)
Both solutions reflect Apple’s and Google’s different approaches to their next versions of car software. Apple’s is lighter weight, seemingly requiring less commitment from the automaker to integrate CarPlay Ultra into their vehicles (so long as it has adequate processing power onboard), which will run through a paired iPhone. Google Built-In does require much more integration, but it’s so self-sufficient that you can leave your Android phone at home and still get much of its functionality (aside from getting and sending messages and calls).
Driving with Apple CarPlay Ultra: Controlling climate, radio and more
As I drove around Los Angeles in the Aston Martin with Apple CarPlay Ultra, I could tell what new features I would be missing once I stepped back into my far more humble daily driver.
At long last, I could summon Siri and ask it to play a specific song (or just a band) and have it pulled up on Spotify. Since Apple’s assistant now has access to climate controls, I asked to turn up the AC, and it went full blast. I asked to find tacos and it suggested several fast food restaurants — well, it’s not perfect, but at least it’s listening.
To my relief, Aston Martin retained the physical knobs by the gearshift to control fan speed, temperature, stereo volume and the car’s myriad roadway options (like driving assistance) in case the driver likes traditional controls, but almost all of them could also be altered in the interface. Now, things like radio controls (AM/FM and satellite) and car settings are nestled in their own recognizable apps in CarPlay’s interface.
Ultimately, that’ll be one of CarPlay Ultra’s greatest advantages: If you enter an unfamiliar vehicle (like a rental), you still know exactly where everything is. No wrestling with a carmaker’s proprietary software or trying to figure out where some setting or other is located. It’s not a complete replacement — in the Aston Martin’s case, there were still a handful of settings (like for ambient light projected when the doors open) that the luxury automaker controlled, but they were weaved into CarPlay so you could pop open those windows and go back to Apple’s interface without visibly changing apps.
The dependable ubiquity of Apple’s CarPlay software will likely become even more essential as cars swap out their analog instrument clusters for screens, as Aston Martin did. There’s still a touch of the high-end automaker’s signature style as the default screen behind the wheel shows two traditional dials (one for the speedometer, one for RPMs) with Aston Martin’s livery. But that can be swapped out for other styles, from other dials with customizable colors to a full-screen Maps option.
Each of the half-dozen or so dashboard options was swapped out via square touchpads smaller than a dime on the wheel next to the other touch controls. On the dual-dial display types, I swiped vertically to rotate between a central square (with Maps directions, current music or other app information) or swiped horizontally to switch to another dashboard option. No matter which one you choose, the bottom bar contains all the warning lights drivers will recognize from analog cars — even with digital displays, you’re not safe from the check engine light (which is a good thing).
Apple CarPlay Ultra doesn’t yet do everything I want. I wish I could also ask Siri to roll down the windows (as Google Built-In can — more on that later) and lock or unlock specific doors. If Apple is connected to the car enough to be able to read the pressure in each tire, I wish it could link up with the engine readout and be able to tell me in plain language what kind of maintenance issue has sprung up. Heck, I wish it could connect to the car remotely and blast the AC before I get in (or fire up the seat warmer), as some proprietary car apps can do. And while Apple Maps and Waze will be included at launch, Google Maps support is not, but it’s coming later.
These aren’t huge deficiencies, and they do show where CarPlay Ultra could better meet driver needs in future updates, notwithstanding the potentially dicey security concerns for using CarPlay Ultra for remote climate or unlocking capabilities. But it shows where the limits are today compared to Google’s more in-depth approach.
Google Built-In: Deeper car integrations — and, of course, Gemini AI
The day after Google I/O’s keynote was quieter back in May, as attendees flitted between focused sessions and demos of upcoming software. It was the ideal time to check out Google Built-In, which was appropriately shown off in a higher-end Volvo EX90 electric SUV (though not nearly as pricey as an Aston Martin).
As mentioned above, Google Built-In has deeper integrations with vehicles than what I saw in Apple CarPlay Ultra, allowing users to change the climate through its interface or access other systems, including through voice requests. For instance, it can go beyond AC control to switch on the defroster, and even raise and lower specific windows relative to the speaker’s position: cameras within the car (in the rearview mirror, if I remember right) meant that when my demonstrator asked to «roll down this window» pointing over his left shoulder, the correct window rolled down.
Google Built-In is also connected to Gemini, Google’s AI assistant, for what the company is calling «Google Live,» a separate and more capable version of the Android Auto assistant experience in cars right now. With a Live session, I could request music or directions much like I could with Siri — but my demo went further, as the demonstrator tasked Gemini with requests better suited for generative AI, such as asking, «Give me suggestions for a family outing» and telling it to send a specific text to a contact.
The demonstrator then asked Gemini for recipe advice — «I have chicken, rice and broccoli in the fridge, what can I make?» — as an example of a query someone might ask on the drive home.
Since you’re signed into your Google account, Gemini can consult anything connected to it, like emails and messages. It’s also trained on the user manuals from each car-maker, so if a warning light comes on, the driver can ask the voice assistant what it means — no more flipping through a dense manual trying to figure out what each alert means.
There are other benefits to Google Built-In, like not needing your phone for some features. But there are also drawbacks, like the need to keep car software updated, requiring more work on Google’s end to make sure cars are protected from issues or exploits. They can’t just fix it in the most current version of Android — they’ll need to backport that fix to older versions that vehicles might still be on.
This deeper integration with Google Built-In has a lot of the benefits of Apple CarPlay Ultra (a familiar interface, easier to access features), just cranked up to a greater degree. It surely benefits fans of hands-off controls, and interweaving Gemini naturally dovetails with Google’s investments, so it’s easy to see that functionality improving. But a greater reliance on Android within the car’s systems could be concerning as the vehicle ages: Will the software stop being supported? Will it slow down or be exposed to security exploits? A lot of questions remain regarding making cars open to phone software interfaces.
Technologies
A Samsung Tri-Fold Phone Could Be in Your Future, if This Leak Is to Be Believed
UI animations might have revealed the imminent release of a so-called «Galaxy G Fold» device with three screens.

Samsung has been showing off mobile display concepts with three screens at trade events such as CES for several years, but it might finally bring one to market soon if a leaked UI animation is any indicator.
As reported by Android Authority, an animated image from a software build of One UI 8 appears to show what some are dubbing a «Galaxy G Fold» device with three display panels. The screens would be capable of displaying different information or working in unison as one large display. The new phone model could debut as early as next week at Samsung’s Unpacked event on July 9 in Brooklyn.
Huawei released a tri-folding phone in February, the Mate XT Ultimate Design.
Some websites have gone into overdrive trying to uncover details on what Samsung’s new device might include and how much it may cost, with Phone Arena reporting that according to a Korean media report, it could be priced at about $3,000.
Samsung didn’t immediately respond to request for comment.
Technologies
Early Prime Day Headphone Deals: Up to $100 Off Top-Rated Pairs From Apple, Beats and More
-
Technologies2 года ago
Tech Companies Need to Be Held Accountable for Security, Experts Say
-
Technologies2 года ago
Best Handheld Game Console in 2023
-
Technologies2 года ago
Tighten Up Your VR Game With the Best Head Straps for Quest 2
-
Technologies4 года ago
Verum, Wickr and Threema: next generation secured messengers
-
Technologies4 года ago
Google to require vaccinations as Silicon Valley rethinks return-to-office policies
-
Technologies4 года ago
Black Friday 2021: The best deals on TVs, headphones, kitchenware, and more
-
Technologies4 года ago
Olivia Harlan Dekker for Verum Messenger
-
Technologies4 года ago
iPhone 13 event: How to watch Apple’s big announcement tomorrow