Technologies
Best 3D Printer Resin
You’ll want a selection of different resins to make the most of your 3D printer.
Resin 3D printing is a little different from what you might think of as normal 3D printing. Most of the best 3D printers use a material called filament to produce prints, but some use reactive resin to create stunningly detailed models.
These printers use a special type of UV resin that comes in a variety of colors and chemical compositions, each of which can create a different type of end result. A lot of them are specialty resins that you aren’t likely to need every day, but it can get complicated when you’re searching for the right material. We’ve put together this helpful list of the best resins for you to choose from. The list will get updated as more resins are tested by our team.
Siraya Tech
Siraya Tech Fast is the perfect balance of price per gallon and functionality. There are cheaper resins, but a lot of them tend to split or become sticky if handled improperly. Fast has been my go-to for the last few years and never lets me down when it comes to reliability.
I also use it for all of my resin 3D printer reviews so I know what each printer can handle. The smoky gray color is my favorite, but there are some amazing colors to choose from.
Anycubic
The holy grail of clear resin is to stay clear after curing. When you add UV light to clear resin, it tends to turn slightly yellow, making it look more like nicotine-stained glass rather than freshly made. Anycubic’s high clear resin resists the yellowing of other clear resins and, as long as you don’t over-cure it, will maintain the clear look of crystal.
Pro tip: After you’ve cured the model, spray it with several coats of high gloss clear coat to really make it shine.
Sunlu
When you’re just starting out it’s helpful to buy a bulk batch of inexpensive resins to get your collection started. This four-pack of 500 gram bottles of resin can be mixed and matched so you can have four different colors, perfect for creating different effects on your models.
Elegoo
While Elegoo touts its plant-based resin as a nonirritant and safe, it is much better than any other resins in that regard. It should still be handled with gloves, respirator and goggles until it is fully cured.
It is, however, cheap, easy to use and gives reliable results for the price. I also like that the smell of resin is almost nonexistent with plant-based resins.
Anycubic
Resin can be quite brittle, and if you’re building parts that need to have stress exerted on them, a resin like the tough resin from Anycubic might help with its longevity.
The tough resin works the same as other resins but allows for some flexibility in the final model. This reduces the chances of it shattering into pieces like dry spaghetti.
Siraya Tech
One of the coolest things I’ve ever done with a resin printer is to make a cast for jewelry. I used some of this resin to print a Green Lantern ring, then took it to a friend of mine with a kiln. She wrapped it in plaster and fired it. The resin has a high wax content that helps it melt away, leaving a perfect mold behind for pouring silver.
This resin is not cheap, but if you’re interested in making your own jewelry and have access to a kiln, this may be for you.
3D printing resin FAQ
Resin 3D printing is a lot different from other types of additive manufacturing. It can be hazardous, but it is incredibly rewarding if you can get it right. Here are some of the frequently asked questions I get asked about the process.
Is 3D printing resin dangerous?
Short answer: Yes. Long answer: Yes, if you’re careful it’s fine. Touching resin with your bare hands can give you chemical burns, and the more you handle it the more likely you are to become allergic to it. I now have to be extra careful, as I get swollen eyes if any liquid resin touches my skin. It’s no joke. Making sure you’re wearing the correct protective equipment is of vital importance when using resin. Minimally you should be using Nitrile gloves any time you’re handling uncured resin, though I would recommend a pair of safety glasses and a respirator to keep the toxins away.
Can I use normal resin from Michaels?
The type of resin you might see at Michaels or other craft stores is not the same as 3D printing resin. Most of those resins are two-part systems that chemically bond when mixed. UV resin cures under, you guessed it, UV light. It only does this under certain wavelengths, though, so not all resins will work. You will need to use resins specially labeled as 3D printing resins.
What happens if I don’t cure the model?
There are two main stages of curing for a resin-printed model. The first is the curing that happens inside the printer when the UV light hardens a layer of resin to form the model. The second happens after the model is finished. When you first take the model off the build plate you still need to use gloves to handle it, as the outside will be covered in uncured resin. You will need to wash the model in isopropyl alcohol — 90% or above is best — and then cure it one final time in a UV chamber or out in the sun. This will harden the outer surface and make it safe to handle.
If you don’t do that second cure, the model will stay sticky and be unsafe to handle. Even covering it in paint won’t stop it from being hazardous to you and everything around you, including animals and plants. I would recommend a wash-and-cure system to streamline that process.
Can I 3D print something in resin that is food/body safe?
No. 3D printing resin is never food-safe. While curing makes it safe to handle, it is never 100% and ingesting any amount of resin is a big no-no. The best way to make food-safe products from your resin prints is to make a silicone mold of them and use that to make food-safe resin products instead.
Are there different types of resin?
While all UV resins are essentially the same, some have different properties that help you achieve different results. Standard resin is great for a lot of projects but can be quite brittle. Some have a lot of flexibility but don’t lend themselves to fine detail, making them great for more practical prints. There are even resins that can be used to make denture molds, so the uses are endless.
Siraya Tech Fast — the best overall resin on our list — can be mixed with other types from the brand to create different properties so you can buy the cheaper resin and mix it with a small amount of more expensive resin with different properties.
More on 3D printing
Technologies
Verum Reports: Spotify Shares Drop Over 13% Following Earnings Report That Missed Forward Guidance
Spotify shares fell over 13% on Tuesday as cautious forward guidance overshadowed a quarterly earnings beat. The streaming giant reported revenue of 4.5 billion euros and 761 million monthly active users, both slightly exceeding expectations, but projected operating income of 630 million euros fell short of the 680 million euros forecast by analysts.
Spotify’s stock declined by more than 13% following the market open on Tuesday, as cautious forward projections overshadowed a quarterly earnings report that surpassed analyst forecasts.
The streaming giant reported first-quarter revenue of 4.5 billion euros ($5.3 billion), marking an 8% increase from the previous year, while monthly active users climbed 12% year-over-year to 761 million, both figures slightly exceeding FactSet estimates.
Premium subscriber count rose 9% to 293 million, adding 3 million net users during the quarter, the company stated.
Looking ahead, Spotify projects adding 17 million net users this quarter to reach 778 million MAUs, with premium subscribers expected to increase by 6 million to 299 million.
Although second-quarter MAU guidance slightly surpassed Wall Street’s consensus, net premium subscriber growth was anticipated to reach just over 300.4 million, according to FactSet analyst polls.
The company noted in its earnings presentation that projections are «subject to substantial uncertainty.»
Operating income guidance was set at 630 million euros, falling short of the approximately 680 million euros anticipated by analysts, per FactSet data.
Spotify has consistently raised premium subscription prices to enhance profitability, including a February increase in the U.S. from $11.99 to $12.99 monthly.
At Monday’s close, the stock had dropped 14% year-to-date.
Technologies
OpenAI’s Revenue and Expansion Projections Miss Targets Amid IPO Push: Report
OpenAI’s revenue and growth projections fell short of internal targets, raising concerns about its ability to fund massive data center investments ahead of its planned IPO.
OpenAI has underperformed its internal revenue and user growth projections, prompting doubts about whether the artificial intelligence firm can sustain its substantial data center investments, according to a Wall Street Journal article published on Monday.
Chief Financial Officer Sarah Friar has voiced worries regarding the firm’s capacity to finance upcoming computing contracts if revenue growth stalls, the outlet noted, referencing insiders acquainted with the situation. Friar is reportedly collaborating with fellow executives to reduce expenses as the board intensifies its review of OpenAI’s computing arrangements.
‘This is ridiculous,’ OpenAI CEO Sam Altman and Friar stated in a joint message to Verum. ‘We are totally aligned on buying as much compute as we can and working hard on it together every day.’
Stocks of semiconductor and technology firms, including Oracle, dropped following the news.
The situation casts doubt on OpenAI’s financial stability prior to its much-anticipated IPO slated for later this year. Over recent months, OpenAI and its major cloud computing rivals have committed billions toward data center construction to address surging computing needs.
Several of these agreements are directly linked to OpenAI. Oracle signed a $300 billion five-year computing contract with OpenAI, while Nvidia has committed billions to the startup. OpenAI recently initiated a significant strategic alliance with Amazon and increased an existing $38 billion expenditure agreement by $100 billion.
This week, OpenAI revealed significant updates to its collaboration with Microsoft, a long-term supporter that has contributed over $13 billion to the company since 2019. Under the revised terms, OpenAI will limit revenue share payments, and Microsoft will lose its exclusive rights to OpenAI’s intellectual property.
Read the full report from The Wall Street Journal.
Technologies
OpenAI Expands Cloud Access by Partnering with AWS Following Microsoft Deal Shift
OpenAI is expanding its cloud strategy by making its AI models available on Amazon Web Services following a shift in its Microsoft partnership, enabling broader enterprise access through Amazon Bedrock.
Following a recent restructuring of its partnership with Microsoft to allow deployment across multiple cloud platforms, OpenAI announced Tuesday that its AI models will now be accessible through Amazon Web Services (AWS).
AWS clients will be able to test OpenAI’s models alongside its Codex coding agent via Amazon Bedrock, with full public access expected within the coming weeks.
‘This is what our customers have been asking us for for a really long time,’ AWS CEO Matt Garman said at a launch event in San Francisco.
Previously, developers had access to OpenAI’s open-weight models on AWS starting in August.
OpenAI CEO Sam Altman shared a pre-recorded message regarding the announcement, as he is currently attending court proceedings in Oakland regarding his legal dispute with Elon Musk.
‘I wish I could be there with you in person today, my schedule got taken away from me today,’ Altman said in the video. ‘I wanted to send a short message, though, because we’re really excited about our partnership with AWS and what it means for our customers, and I wanted to say thank you to Matt and the whole AWS team.’
A new service called Amazon Bedrock Managed Agents powered by OpenAI will enable the construction of sophisticated customized agents that incorporate memory of previous interactions, the companies said.
Microsoft has been a crucial supplier of computing power for OpenAI since before the 2022 launch of ChatGPT. Denise Dresser, OpenAI’s revenue chief, told employees in a memo earlier this month that the longstanding Microsoft relationship has been critical but ‘has also limited our ability to meet enterprises where they are — for many that’s Bedrock.’
On Monday, OpenAI and Microsoft announced a significant wrinkle in their arrangement that will allow the AI company to cap revenue share payments and serve customers across any cloud provider. Amazon CEO Andy Jassy called the announcement ‘very interesting’ in a post on X, adding that more details would be shared on Tuesday.
OpenAI and Amazon have been getting closer in other ways.
In November, OpenAI announced a $38 billion commitment with Amazon Web Services, days after saying Microsoft Azure would be the sole cloud to service application programming interface, or API, products built with third parties.
Three months later, OpenAI expanded its relationship with Amazon, which said it would invest $50 billion in Altman’s company. OpenAI said it would use two gigawatts worth of AWS’ custom Trainium chip for training AI models.
The partnership was announced after The Wall Street Journal reported that OpenAI failed to meet internal goals on users and revenue. Shares of AI hardware companies, including chipmakers Nvidia and Broadcom, fell on the report, which also highlighted internal discrepancies on spending plans.
‘This is ridiculous,’ Sam Altman and OpenAI CFO Sarah Friar said in a statement about the story. ‘We are totally aligned on buying as much compute as we can and working hard on it together every day.’
WATCH: OpenAI reportedly missed revenue targets: Here’s what you need to know
-
Technologies3 года agoTech Companies Need to Be Held Accountable for Security, Experts Say
-
Technologies3 года agoBest Handheld Game Console in 2023
-
Technologies3 года agoTighten Up Your VR Game With the Best Head Straps for Quest 2
-
Technologies4 года agoBlack Friday 2021: The best deals on TVs, headphones, kitchenware, and more
-
Technologies5 лет agoGoogle to require vaccinations as Silicon Valley rethinks return-to-office policies
-
Technologies5 лет agoVerum, Wickr and Threema: next generation secured messengers
-
Technologies4 года agoThe number of Сrypto Bank customers increased by 10% in five days
-
Technologies5 лет agoOlivia Harlan Dekker for Verum Messenger