Technologies

Trouble Falling Asleep? Change These iPhone Settings to Speed Up the Process

Did you know there are iPhone features you can use to relax and get ready for bed?

You should be asleep, but instead you’re scrolling through your iPhone in the middle of the night. The display is a bit too bright, so you go to lower the brightness — only to realize that it’s already at the lowest setting possible. If you continue using your phone like this, you could strain your eyes, potentially causing headaches and making it harder for you to fall asleep. And that’s not good.

Fortunately, there are a few iOS features that can help you lower your screen’s brightness more than the standard settings allow.

In this guide, we’ll touch on some built-in features that can darken your screen like you didn’t think possible. No more straining your eyes or disturbing others with your incredibly bright iPhone display.

Before we get started, it’s important to note that you probably shouldn’t use all these features together, so experiment with a combination that works for you and the lighting in your environment.

For more iOS tips, check out 22 iPhone settings you should change right now and 14 hidden iPhone features you might not know about.

iPhone Pro Tip — Get privacy and protection with this iPhone screen protector

This tempered glass screen protector, designed for the iPhone 14 and older models, protects your display from cracks, scratches and dust. And the screen protector is coated with a special filter that allows light to pass through only from certain angles, to protect your privacy.

$8 at Amazon

Get Price Alerts

You’re receiving price alerts for Pehael [2+2 Pack] iPhone 14 Privacy Screen Protector with Camera Lens Protector Full Coverage Anti-Spy Tempered Glass Film 9H Hardness Upgrade Edge Protection Easy Installation Bubble Free Specially Designed for iPhone 14 [6.1 inch]

1. Enable Night Shift to make your display warmer

The Night Shift feature automatically adjusts your display — using your phone’s internal clock and geolocation — to warmer colors that are easier on your eyes. Every morning, the display returns to its regular settings. You can turn it on in your Settings or via the Control Center.

Method 1: Settings

Go to Settings > Display & Brightness > Night Shift. From here, you can either schedule the feature at a certain time or enable it for the entire day and have it disable in the morning. You can also adjust the color temperature by using the slider at the bottom of the page — you can choose between less warm and more warm.

Method 2: Control Center

Swipe down from the top-right to access the Control Center. Then press and hold the Brightness icon and tap the Night Shift button to turn it on and off.

You can access Night Shift from your settings or the Control Center.

Screenshots by Nelson Aguilar/CNET

2. Reduce white point to bring down intensity of bright colors

You can also reduce the white point on your iPhone to adjust how intensely colors show up on your screen. Bright colors are especially illuminated at night time, so try this setting to dull them a bit.

In Settings, go to Accessibility > Display & Text Size and toggle on Reduce White Point. A marker will appear under the setting, which you can use to adjust the intensity of bright colors to your liking.

This adjusts the intensity of bright colors on your display.

Screenshots by Nelson Aguilar/CNET

3. Use Zoom to add low light filter

If you’re only interested in dropping the brightness, and don’t want warmer colors or less intense colors, there is a way to lower just the display brightness. Using the Zoom accessibility feature, you can add a low light filter over your display to make it darker than usual.

Launch the Settings application and go to Accessibility > Zoom and make sure that the Low Light option is chosen under Zoom Filter. If you’d like, you can toggle on the Zoom feature here, but the easier way is to triple-click the side button from anywhere on your phone to use Zoom.

When Zoom is enabled, your phone will automatically add the low light filter to your display, making it darker, even if your brightness is already at its lowest. A small floating circle will appear on your screen, indicating that Zoom is currently turned on. If you tap the controller, you can hide it. To disable Zoom, simply triple-click on the side button again.

The easiest way to enable the low light filter is to quickly triple-click the side button.

Screenshots by Nelson Aguilar/CNET

Technologies

iOS 17 Cheat Sheet: Your Questions on the iPhone Update Answered

Here’s what you need to know about new features and upcoming updates for your iPhone.

Apple’s iOS 17 was released in September, shortly after the company held its Wonderlust event, where the tech giant announced the new iPhone 15 lineup, the Apple Watch Series 9 and the Apple Watch Ultra 2. We put together this cheat sheet to help you learn about and use the new features in iOS 17. It’ll also help you keep track of the subsequent iOS 17 updates.

iOS 17 updates

Using iOS 17

Getting started with iOS 17

Make sure to check back periodically for more iOS 17 tips and how to use new features as Apple releases more updates.

17 Hidden iOS 17 Features You Should Definitely Know About

+15 More

See all photos

Technologies

Get Ready for a Striking Aurora That Could Also Disrupt Radio Communications

Don’t expect the storm to cause a lingering problem, though.

A geomagnetic storm is threatening radio communications Monday night, but that doesn’t mean you should be concerned. In fact, it may be an opportunity to see a colorful aurora in the night sky.

The National Oceanic and Atmospheric Administration has issued a geomagnetic storm watch after witnessing a coronal mass ejection from the sun on Saturday. The watch, which was issued over the weekend and will expire after Monday, said the onset of the storm passing over Earth on Sunday night represented a «moderate» threat to communications. As the storm continues to pass through, it could deliver a «strong» threat on Monday night that could cause radio communications to be temporarily disrupted during the worst of it.

Even so, NOAA said, «the general public should not be concerned.»

A coronal mass ejection occurs when magnetic field and plasma mass are violently expelled from the sun’s corona, or the outermost portion of the sun’s atmosphere. In the vast majority of cases, the ejection occurs with no real threat to Earth. However, in the event the ejection happens in the planet’s direction, a geomagnetic storm occurs, and the Earth’s magnetic field is temporarily affected.

In most cases, geomagnetic storms cause little to no disruption on Earth, with radio communications and satellites affected most often. In extreme cases, a geomagnetic storm can cause significant and potentially life-threatening power outages — a prospect that, luckily, the planet hasn’t faced.

Switching poles

Every 11 years, the sun’s magnetic poles switch, with the north pole and south pole swapping positions. During those cycles, the sun’s activity ramps up as it gets closer to pole-switching time. The height of its activity is called solar maximum, and scientists believe we either may be entering the solar maximum or may be already in it.

During periods of heightened solar activity, sunspots increase on the sun and there’s an increase in coronal mass ejections, among other phenomena. According to NOAA, solar maximum could extend into October of this year before the sun’s activity calms and it works towards its less-active phase, solar minimum.

Even when geomagnetic storms hit Earth and disrupt communications, the effects are usually short-lived. Those most affected, including power grid operators and pilots and air traffic controllers communicating over long distances, have fail-safe technologies and backup communications to ensure operational continuity.

But geomagnetic storms aren’t only about radios. In most cases, they also present unique opportunities to see auroras in the night sky. When the storms hit, the plasma they carry creates a jaw-dropping aurora, illuminating the night sky with brilliant colors. Those auroras can be especially pronounced during the most intense phases of the storm, making for nice stargazing.

If you’re interested in seeing the aurora, you’ll need to be ready. The NOAA said the «brunt of the storm has passed» and even if it lingers into Tuesday, there won’t be much to see after Monday night.

Technologies

Last Total Solar Eclipse for 20 Years Is Coming: How to See and Photograph It

It’s your last chance until 2044.

Get your eclipse glasses ready, Skygazers: the Great American Eclipse is on its way. On April 8, there’ll be a total eclipse over North America, the last one until 2044.

A total solar eclipse happens when the moon passes between the Earth and the sun, blocking the sun and turning an otherwise sunny day to darkness for a short period of time. Depending on the angle at which you’re viewing the eclipse, you may see the sun completely shrouded by the moon (called totality) or some variation of it. The more off-angle you are and the further you are from the path of the eclipse, the less likely you’ll be to see the totality.

The 2024 total solar eclipse will happen on Monday, April 8. The Great American Eclipse will reach the Mexican Pacific coast at 11:07 a.m. PT (2:07 p.m. ET), and then traverse the US in a northeasterly direction from Texas to Maine, and on into easternmost Canada. If you want a good look at it, but don’t live in the path of totality, you shouldn’t wait much longer to book accommodation and travel to a spot on the path.

Or how about booking a seat in the sky? Delta Airlines made headlines for offering a flight that allows you to see the entire path of totality. Its first eclipse flight, from Austin, Texas, to Detroit sold out quickly. But as of Monday, Delta has added a second flight from Dallas to Detroit, which also covers the path of totality. The airline also has five flights that will offer prime eclipse viewing.

Not everyone can get on one of those elusive eclipse-viewing flights. Here’s a look at other options to nab a chance to see this rare sight and what to know about it.

Total solar eclipse path

The eclipse will cross over the Pacific coast of Mexico and head northeast over mainland Mexico. The eclipse will then make its way over San Antonio at approximately 2:30 p.m. ET on April 8 and move through Texas, over the southeastern part of Oklahoma and northern Arkansas by 2:50 p.m. ET.

By 3 p.m. ET, the eclipse will be over southern Illinois, and just 5 minutes later, will be traveling over Indianapolis. Folks in northwestern Ohio will be treated to the eclipse by 3:15 p.m. ET, and it will then travel over Lake Erie and Buffalo, New York, by 3:20 p.m. ET. Over the next 10 minutes, the eclipse will be seen over northern New York state, then over Vermont. By 3:35 p.m. ET, the eclipse will work its way into Canada and off the Eastern coast of North America.

Best places to watch the Great American Eclipse

When evaluating the best places to watch this year’s total eclipse, you’ll first want to determine where you’ll have the best angle to see the totality. The farther off-angle you are — in other words, the farther north or south of the eclipse’s path — the less of an impact you can expect.

Therefore, if you want to have the best chance of experiencing the eclipse, you’ll want to be in its path. As of this writing, most of the cities in the eclipse’s path have some hotel availability, but recent reports have suggested that rooms are booking up. And as more rooms are booked, prices are going up.

So if you want to be in the eclipse’s path, and need a hotel to do it, move fast. And Delta’s eclipse-viewing flight from Dallas to Detroit has just four seats left at the time of publication.

Eclipse eye safety and photography

As with any solar eclipse, it’s critical you keep eye safety in mind.

During the eclipse, and especially during the periods before and after totality, don’t look directly at the sun without special eye protection. Also, be sure not to look at the sun through a camera (including the camera on your phone), binoculars, a telescope or any other viewing device. This could cause serious eye injury. Sunglasses aren’t enough to protect your eyes from damage.

If you want to view the eclipse, you’ll instead need solar viewing glasses that comply with the ISO 12312-2 safety standard. Anything that doesn’t meet that standard or greater won’t be dark enough to protect your eyes. Want to get them for free? If you’ve got a Warby Parker eyeglasses store nearby, the company is giving away free, ISO-certified solar eclipse glasses at all of its stores from April 1 until the eclipse, while supplies last.

If you don’t have eclipse viewing glasses handy, you can instead use indirect methods for viewing the eclipse, like a pinhole projector.

Read more: A Photographer’s Adventure With the Eclipse

In the event you want to take pictures of the eclipse, attach a certified solar filter to your camera. Doing so will protect your eyes and allow you to take photos while you view the eclipse through your lens.

There’s also a new app to help you both protect your eyes and take better photos of the eclipse on your phone. Solar Snap, designed by a former Hubble Space Telescope astronomer, comes with a Solar Snap camera filter that attaches to the back of an iPhone or Android phone, along with solar eclipse glasses for protecting your eyesight during the event. After you attach the filter to your phone, you can use the free Solar Snap Eclipse app to zoom in on the eclipse, adjust exposure and other camera settings, and ultimately take better shots of the eclipse.

2024 eclipse compared to 2017

The last total solar eclipse occurred in 2017, and many Americans had a great view. Although there are plenty of similarities between the 2017 total solar eclipse and the one coming April 8, there are a handful of differences. Mainly, the 2024 eclipse is going to cover more land and last longer.

The 2017 eclipse started over the northwest US and moved southeast. Additionally, that eclipse’s path was up to 71 miles wide, compared with a maximum width of 122 miles for this year’s eclipse. Perhaps most importantly, the moon completely covered the sun for just 2 minutes, 40 seconds in 2017. This year, maximum totality will last for nearly four-and-a-half minutes.