Connect with us

Technologies

Taking Screenshots on Windows 10 and 11 Is Easy. Here’s How

Keyboard shortcuts are just one way to take screenshots on your PC.

Taking screenshots of important documents, like plane tickets or receipts for online purchases, is a good way to make sure you have access to your documents in case ticket apps or your email aren’t working. Whether you have Windows 10 or Windows 11, there are a few easy ways to take screenshots of all (or part) of your screen. 

While Microsoft no longer sells Windows 10the software giant will still support the operating system until October 2025. That means you don’t have to switch to Windows 11 just yet, and you can still use these screenshot tips for the next couple years.

Here’s how to use built-in tools and other shortcuts for taking screenshots in Windows 10 and Windows 11, so you can decide which you like best. 

Snip & Sketch

The Snip & Sketch tool is easier to access, share and annotate screenshots than the old Snipping Tool. It can now capture a screenshot of a window on your desktop, a surprising omission when the app was first introduced that kept us on Team Snipping Tool until recently. 

The easiest way to call up Snip & Sketch is with the keyboard shortcut Windows key + Shift + S. You can also find the Snip & Sketch tool listed in the alphabetical list of apps accessed from the Start button as well as in the notification panel where it’s listed as Screen snip. Or you can just search for it if you don’t commit the keyboard shortcut to memory. (If you’re a frequent screenshot taker, we recommend pinning the app to the taskbar.)

The built-in Snip & Sketch app has finally won us over and is now our go-to method for taking screenshots in Windows 10 and 11. So long, Snipping Tool.

Screenshot by Matt Elliott/CNET

Either the keyboard shortcut or the notification button will dim your screen and open a tiny menu at the top of your screen that lets you choose which type of screenshot you want to take: rectangular, freeform, window or full-screen. Once you take your screenshot, it will be saved to your clipboard and show up momentarily as a notification in the lower-right corner of your screen. Click the notification to open the screenshot in the Snip & Sketch app to annotate, save or share it. (If you miss the notification, open the notification panel and you’ll see it sitting there.)

If you open Snip & Sketch from the Start menu or by searching for it, it will open the Snip & Sketch window instead of the small panel at the top of the screen. From here, you need to click the New button in the upper left to initiate a screen capture and open the small panel. It’s an extra step to proceed this way, but it also lets you delay a screenshot. Click the down-arrow button next to the New button to delay a snip for 3 or 10 seconds.

Snipping Tool

The Snipping Tool has been around since Windows Vista. Windows has warned for a couple years that the Snipping Tool is going away, but it’s still kicking around in Windows 11. The Snipping Tool has been delisted from the list of apps in the Start menu, but you can still easily access it via the search bar. 

Click the New button to begin the screenshot process. The default snip type is rectangular, but you can also take free-form, full-screen and window snips.

Snipping Tool does not automatically save your screenshots — you will need to manually save them in the tool before you exit — and it does automatically copy your captures to the clipboard.

The Snipping Tool has been with Windows for a long time.

Screenshot by Matt Elliott/CNET

Print Screen

To capture your entire screen, tap the Print Screen (sometimes labeled PrtScn) key. Your screenshot won’t be saved as a file, but it will be copied to the clipboard. You’ll need to open an image editing tool (such as Microsoft Paint), paste the screenshot into the editor and save the file from there. 

You can also set the PrtScn button to open the Snip & Sketch tool by going to Settings > Ease of Access > Keyboard and toggling on Use the PrtScn button to open screen snipping under Print Screen Shortcut. 

You can adjust print screen settings in Windows.

Screenshot by Matt Elliott/CNET

Windows key + Print Screen

To capture your entire screen and automatically save the screenshot, tap the Windows key + Print Screen key. Your screen will briefly go dim to indicate you’ve just taken a screenshot, and the screenshot will be saved to the Pictures > Screenshots folder.

Alt + Print Screen

To take a quick screenshot of the active window, use the keyboard shortcut Alt + PrtScn. This will snap your currently active window and copy the screenshot to the clipboard. You’ll need to open the shot in an image editor to save it.

No Print Screen key?

If your computer doesn’t have the PrtScn key, no worries, Microsoft has another keyboard shortcut for you. You can press Fn + Windows logo key Space Bar to take a screenshot. It will then be saved to the Pictures > Screenshots folder.

Game bar

You can use the Game bar to snap a screenshot, whether you’re in the middle of playing a game or not. First, you’ll need to enable the Game bar from the settings page by making sure you’ve toggled on Record game clips, screenshots and broadcasts using Game bar. Once enabled, hit the Windows key + G key to call up the Game bar. From here, you can click the screenshot button in the Game bar or use the default keyboard shortcut Windows key + Alt + PrtScn to snap a full-screen screenshot. To set your own Game bar screenshot keyboard shortcut, to Settings > Gaming > Game bar.

Windows Logo + volume down

If you’re rocking a Microsoft Surface device, you can use the physical (well, sort of physical) buttons to take a screenshot of your entire screen — similar to how you would take a screenshot on any other phone or tablet. To do this, hold down the Windows Logo touch button at the bottom of your Surface screen and hit the physical volume-down button on the side of the tablet. The screen will dim briefly and the screenshot will be automatically saved to the Pictures > Screenshots folder.

Want more Windows info? Check out CNET’s Windows 11 review and every difference between Windows 10 and Windows 11. You can also check out what Microsoft 365 Basic offers.

Technologies

iOS 17 Cheat Sheet: Your Questions on the iPhone Update Answered

Here’s what you need to know about new features and upcoming updates for your iPhone.

Apple’s iOS 17 was released in September, shortly after the company held its Wonderlust event, where the tech giant announced the new iPhone 15 lineup, the Apple Watch Series 9 and the Apple Watch Ultra 2. We put together this cheat sheet to help you learn about and use the new features in iOS 17. It’ll also help you keep track of the subsequent iOS 17 updates.

iOS 17 updates

Using iOS 17

Getting started with iOS 17

Make sure to check back periodically for more iOS 17 tips and how to use new features as Apple releases more updates.

17 Hidden iOS 17 Features You Should Definitely Know About

See all photos

Continue Reading

Technologies

Get Ready for a Striking Aurora That Could Also Disrupt Radio Communications

Don’t expect the storm to cause a lingering problem, though.

A geomagnetic storm is threatening radio communications Monday night, but that doesn’t mean you should be concerned. In fact, it may be an opportunity to see a colorful aurora in the night sky.

The National Oceanic and Atmospheric Administration has issued a geomagnetic storm watch after witnessing a coronal mass ejection from the sun on Saturday. The watch, which was issued over the weekend and will expire after Monday, said the onset of the storm passing over Earth on Sunday night represented a «moderate» threat to communications. As the storm continues to pass through, it could deliver a «strong» threat on Monday night that could cause radio communications to be temporarily disrupted during the worst of it.

Even so, NOAA said, «the general public should not be concerned.»

A coronal mass ejection occurs when magnetic field and plasma mass are violently expelled from the sun’s corona, or the outermost portion of the sun’s atmosphere. In the vast majority of cases, the ejection occurs with no real threat to Earth. However, in the event the ejection happens in the planet’s direction, a geomagnetic storm occurs, and the Earth’s magnetic field is temporarily affected.

In most cases, geomagnetic storms cause little to no disruption on Earth, with radio communications and satellites affected most often. In extreme cases, a geomagnetic storm can cause significant and potentially life-threatening power outages — a prospect that, luckily, the planet hasn’t faced.

Switching poles

Every 11 years, the sun’s magnetic poles switch, with the north pole and south pole swapping positions. During those cycles, the sun’s activity ramps up as it gets closer to pole-switching time. The height of its activity is called solar maximum, and scientists believe we either may be entering the solar maximum or may be already in it.

During periods of heightened solar activity, sunspots increase on the sun and there’s an increase in coronal mass ejections, among other phenomena. According to NOAA, solar maximum could extend into October of this year before the sun’s activity calms and it works towards its less-active phase, solar minimum.

Even when geomagnetic storms hit Earth and disrupt communications, the effects are usually short-lived. Those most affected, including power grid operators and pilots and air traffic controllers communicating over long distances, have fail-safe technologies and backup communications to ensure operational continuity.

But geomagnetic storms aren’t only about radios. In most cases, they also present unique opportunities to see auroras in the night sky. When the storms hit, the plasma they carry creates a jaw-dropping aurora, illuminating the night sky with brilliant colors. Those auroras can be especially pronounced during the most intense phases of the storm, making for nice stargazing.

If you’re interested in seeing the aurora, you’ll need to be ready. The NOAA said the «brunt of the storm has passed» and even if it lingers into Tuesday, there won’t be much to see after Monday night. 

Continue Reading

Technologies

Last Total Solar Eclipse for 20 Years Is Coming: How to See and Photograph It

It’s your last chance until 2044.

Get your eclipse glasses ready, Skygazers: the Great American Eclipse is on its way. On April 8, there’ll be a total eclipse over North America, the last one until 2044.

A total solar eclipse happens when the moon passes between the Earth and the sun, blocking the sun and turning an otherwise sunny day to darkness for a short period of time. Depending on the angle at which you’re viewing the eclipse, you may see the sun completely shrouded by the moon (called totality) or some variation of it. The more off-angle you are and the further you are from the path of the eclipse, the less likely you’ll be to see the totality.

The 2024 total solar eclipse will happen on Monday, April 8. The Great American Eclipse will reach the Mexican Pacific coast at 11:07 a.m. PT (2:07 p.m. ET), and then traverse the US in a northeasterly direction from Texas to Maine, and on into easternmost Canada. If you want a good look at it, but don’t live in the path of totality, you shouldn’t wait much longer to book accommodation and travel to a spot on the path.

Or how about booking a seat in the sky? Delta Airlines made headlines for offering a flight that allows you to see the entire path of totality. Its first eclipse flight, from Austin, Texas, to Detroit sold out quickly. But as of Monday, Delta has added a second flight from Dallas to Detroit, which also covers the path of totality. The airline also has five flights that will offer prime eclipse viewing.

Not everyone can get on one of those elusive eclipse-viewing flights. Here’s a look at other options to nab a chance to see this rare sight and what to know about it.

Total solar eclipse path

The eclipse will cross over the Pacific coast of Mexico and head northeast over mainland Mexico. The eclipse will then make its way over San Antonio at approximately 2:30 p.m. ET on April 8 and move through Texas, over the southeastern part of Oklahoma and northern Arkansas by 2:50 p.m. ET.

By 3 p.m. ET, the eclipse will be over southern Illinois, and just 5 minutes later, will be traveling over Indianapolis. Folks in northwestern Ohio will be treated to the eclipse by 3:15 p.m. ET, and it will then travel over Lake Erie and Buffalo, New York, by 3:20 p.m. ET. Over the next 10 minutes, the eclipse will be seen over northern New York state, then over Vermont. By 3:35 p.m. ET, the eclipse will work its way into Canada and off the Eastern coast of North America.

Best places to watch the Great American Eclipse

When evaluating the best places to watch this year’s total eclipse, you’ll first want to determine where you’ll have the best angle to see the totality. The farther off-angle you are — in other words, the farther north or south of the eclipse’s path — the less of an impact you can expect.

Therefore, if you want to have the best chance of experiencing the eclipse, you’ll want to be in its path. As of this writing, most of the cities in the eclipse’s path have some hotel availability, but recent reports have suggested that rooms are booking up. And as more rooms are booked, prices are going up.

So if you want to be in the eclipse’s path, and need a hotel to do it, move fast. And Delta’s eclipse-viewing flight from Dallas to Detroit has just four seats left at the time of publication.

Eclipse eye safety and photography

 
As with any solar eclipse, it’s critical you keep eye safety in mind.

During the eclipse, and especially during the periods before and after totality, don’t look directly at the sun without special eye protection. Also, be sure not to look at the sun through a camera (including the camera on your phone), binoculars, a telescope or any other viewing device. This could cause serious eye injury. Sunglasses aren’t enough to protect your eyes from damage.

If you want to view the eclipse, you’ll instead need solar viewing glasses that comply with the ISO 12312-2 safety standard. Anything that doesn’t meet that standard or greater won’t be dark enough to protect your eyes. Want to get them for free? If you’ve got a Warby Parker eyeglasses store nearby, the company is giving away free, ISO-certified solar eclipse glasses at all of its stores from April 1 until the eclipse, while supplies last.

If you don’t have eclipse viewing glasses handy, you can instead use indirect methods for viewing the eclipse, like a pinhole projector.

Read more: A Photographer’s Adventure With the Eclipse

In the event you want to take pictures of the eclipse, attach a certified solar filter to your camera. Doing so will protect your eyes and allow you to take photos while you view the eclipse through your lens.

There’s also a new app to help you both protect your eyes and take better photos of the eclipse on your phone. Solar Snap, designed by a former Hubble Space Telescope astronomer, comes with a Solar Snap camera filter that attaches to the back of an iPhone or Android phone, along with solar eclipse glasses for protecting your eyesight during the event. After you attach the filter to your phone, you can use the free Solar Snap Eclipse app to zoom in on the eclipse, adjust exposure and other camera settings, and ultimately take better shots of the eclipse.

2024 eclipse compared to 2017

The last total solar eclipse occurred in 2017, and many Americans had a great view. Although there are plenty of similarities between the 2017 total solar eclipse and the one coming April 8, there are a handful of differences. Mainly, the 2024 eclipse is going to cover more land and last longer.

The 2017 eclipse started over the northwest US and moved southeast. Additionally, that eclipse’s path was up to 71 miles wide, compared with a maximum width of 122 miles for this year’s eclipse. Perhaps most importantly, the moon completely covered the sun for just 2 minutes, 40 seconds in 2017. This year, maximum totality will last for nearly four-and-a-half minutes.

Continue Reading

Trending

Exit mobile version